konfigurasi Router

Cara Konfigurasi Router Statik

 

 

Lab-a .:

1.       Klik pada router , lalu masuk pada jendela seperti pada gambar di bawah . lalu pilih CLI:

  1. Setelah masuk pada jendela CLI maka kita Akan memulai konfigurasi :

    

    --- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!

Router>enable
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname lab-a
lab-a(config)#interface fa0/0
lab-a(config-if)#ip address 192.168.10.1 255.255.255.0
lab-a(config-if)#description lab-a LAN connection
lab-a(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
lab-a(config-if)#exit
lab-a(config)#interface serial0/0
lab-a(config-if)#ip address 172.168.0.1 255.255.255.0
lab-a(config-if)#description WAN connection to lab-b
lab-a(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/0, changed state to down
lab-a(config-if)#exit
lab-a(config)#

3.        

2. 2. Setelah pengkonfigurasian selesai . maka agar stiap komponen saling terhubung maka kita konfigurasikan router menggunakan IP ROUTE , pengkonfigurasian IP ROUTE dapat di lihat dengan cara konfig pada lab-a>sh ip route.  sebagai berikut :

Press RETURN to get started.
lab-a>en
lab-a#config t
Enter configuration commands, one per line.  End with CNTL/Z.
lab-a(config)#ip route 192.168.20.0 255.255.255.0 172.168.0.2
lab-a(config)#ip route 192.168.7.0 255.255.255.0 172.168.0.2
lab-a(config)#ip route 192.168.30.0 255.255.255.0 172.168.0.2
lab-a(config)#exit 
lab-a# 

lab-a>sh ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B – BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
  E1 - OSPF external type 1, E2 - OSPF external type 2, E – EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
    * - candidate default, U - per-user static route, o – ODR
       P - periodic downloaded static route

Gateway of last resort is not set
 

   172.168.0.0/24 is subnetted, 1 subnets
C       172.168.0.0 is directly connected, Serial0/0
S    192.168.7.0/24 [1/0] via 172.168.0.2
C    192.168.10.0/24 is directly connected, FastEthernet0/0
S    192.168.20.0/24 [1/0] via 172.168.0.2
S    192.168.30.0/24 [1/0] via 172.168.0.2
 

3. Konfigurasi selesaii …. Maka lakukan lah PING antar komponen agar bisa terlihat berhasil / tidak pengkonfigurasiaan yang kita lakukan .

Lab-b .:

 

1.       Klik pada router , lalu masuk pada jendela seperti pada gambar di bawah . lalu pilih CLI:

2.       2. Setelah masuk pada jendela CLI maka kita Akan memulai konfigurasi :

Pada konfigurasi lab-b ini di tambahkan 2 clock rate setelah Description WAN connection masing’’ 64000

      

  --- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!
Router>enable

Router#config t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname lab-b

lab-b(config)#interface fa0/0

lab-b(config-if)#ip address 192.168.20.1 255.255.255.0

lab-b(config-if)#description lab-b LAN connection

lab-b(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

lab-b(config-if)#exit

lab-b(config)#interface serial0/0

lab-b(config-if)#ip address 172.168.0.2 255.255.255.0

lab-b(config-if)#description WAN connection to lab-a

lab-b(config-if)#clock rate 64000

lab-b(config-if)#interface serial0/1

lab-b(config-if)#ip address 192.168.7.9 255.255.255.0

lab-b(config-if)#description WAN connection to lab-c

lab-b(config-if)#clock rate 64000

lab-b(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/1, changed state to down

lab-b(config-if)#exit

lab-b(config)#

3.       Setelah pengkonfigurasian selesai . maka agar stiap komponen saling terhubung maka kita konfigurasikan router menggunakan IP ROUTE , pengkonfigurasian IP ROUTE dapat di lihat dengan cara konfig pada lab-a>sh ip route.  sebagai berikut :

Press RETURN to get started.
 

lab-b>en

lab-b#config t
Enter configuration commands, one per line.  End with CNTL/Z.
lab-b(config)#ip route 192.168.10.0 255.255.255.0 172.168.0.1
lab-b(config)#ip route 192.168.30.0 255.255.255.0 192.168.7.9
lab-b(config)#exit
lab-b#
%SYS-5-CONFIG_I: Configured from console by console

       lab-b#sh ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B – BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E – EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o – ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     172.168.0.0/24 is subnetted, 1 subnets
C       172.168.0.0 is directly connected, Serial0/0
C    192.168.7.0/24 is directly connected, Serial0/1
S    192.168.10.0/24 [1/0] via 172.168.0.1
C    192.168.20.0/24 is directly connected, FastEthernet0/0
S    192.168.30.0/24 [1/0] via 192.168.7.9
 

3.  Konfigurasi selesaii …. Maka lakukan lah PING antar komponen agar bisa terlihat berhasil / tidak pengkonfigurasiaan yang kita lakukan .

Lab-c .:

 

1.       Klik pada router , lalu masuk pada jendela seperti pada gambar di bawah . lalu pilih CLI:

2.        Setelah masuk pada jendela CLI maka kita Akan memulai konfigurasi :

     --- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!

Router>enable

Router#config t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname lab-c
lab-c(config)#interface fa0/0

lab-c(config-if)#ip address 192.168.30.1 255.255.255.0

lab-c(config-if)#description lab-c LAN connection

lab-c(config-if)#no shut
lab-c(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
lab-c(config-if)#exit

lab-c(config)#interface serial0/1

lab-c(config-if)#ip address 192.168.7.9 255.255.255.0

lab-c(config-if)#description WAN connection to lab-b

lab-c(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/1, changed state to down

lab-c(config-if)#exit

lab-c(config)#

 2. Setelah pengkonfigurasian selesai . maka agar stiap komponen saling terhubung maka kita konfigurasikan router menggunakan IP ROUTE , pengkonfigurasian IP ROUTE dapat di lihat dengan cara konfig pada lab-a>sh ip route.  sebagai berikut :

            Press RETURN to get started.
lab-c>en
lab-c#config t
Enter configuration commands, one per line.  End with CNTL/Z.
lab-c(config)#ip route 192.168.20.0 255.255.255.0 192.168.7.8
lab-c(config)#ip route 192.168.0.0 255.255.255.0 192.168.7.8
lab-c(config)#ip route 192.168.10.0 255.255.255.0 192.168.7.8
lab-c(config)#exit
lab-c#
%SYS-5-CONFIG_I: Configured from console by console

lab-c#sh ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B – BGP
  D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E – EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o – ODR
       P - periodic downloaded static route

Gateway of last resort is not set

S    192.168.0.0/24 [1/0] via 192.168.7.8
C    192.168.7.0/24 is directly connected, Serial0/1
S    192.168.10.0/24 [1/0] via 192.168.7.8
S    192.168.20.0/24 [1/0] via 192.168.7.8
C    192.168.30.0/24 is directly connected, FastEthernet0/0
 

3..   Konfigurasi selesaii …. Maka lakukan lah PING antar komponen agar bisa terlihat berhasil / tidak pengkonfigurasiaan yang kita lakukan .